Bobcat T190 Turbo Service Repair Manual
G Series
S/N 527011001 & Above S/N
527911001 & Above S/N
527711001 & Above S/N
527811001 & Above.
Bobcat Instructions are necessary before operating or servicing the machine. Read and understand the Operation & Maintenance Manual, Operator’s Handbook, and signs (decals) on a machine. Follow warnings and instructions in the manuals when making repairs, adjustments, or services. Check for correct function after adjustments, repairs, or service. Untrained operators and failure to follow instructions can cause injury or death.
T190 Bobcat Loader10-10-1Service Manual
LIFTING AND BLOCKING THE LOADER
Bobcat Service Manual content Instructions are necessary before operating or servicing the machine. Read and understand the Operation & Maintenance Manual, Operator’handbook and signs (decals) on the machine. Follow warnings and instructions in the manuals when making repairs, adjustments, or servicing. Check for correct function after adjustments, repairs, or service. Untrained operators and failure to follow instruction scan cause injury or death.
Bobcat T190 Turbo Service Repair Manual
LIFTING AND BLOCKING THE LOADER (CONT’D)Single Point Lift Figure 10-10-4
The loader can be lifted with the Single Point Lift, which is available as a kit from your Bobcat loader dealer. Install the kit as explained in the instructions with the kit and attach the lift as shown
The Single Point Lift, supplied by Bobcat, is designed to lift and support the Bobcat loader without affecting rollover and falling object protection features of the operator cab.
T190 Bobcat Loader 10-20-1 Service Manual
LIFT ARM SUPPORT DEVICE Installing Lift Arm Support Device
Never work on a machine with the lift arms up unless the lift arms are secured by an approved lift arm support device. Failure to use an approved lift arm support device can allow the lift arms or attachment to fall and cause injury or death.
Service lift arm support device if damaged or if parts are missing. Using a damaged lift arm support or with missing parts, can cause lift arms to drop causing injury or death.
W-2271-1197
Put jack stands under the rear corners of the loader frame(Inset)
. Remove the lift arm support device (Item 1)
from storage position.
ENGINE COOLING SYSTEM
Cleaning The Cooling System
WARNING
Wear safety glasses to prevent eye injury when any of the following conditions exist:•When fluids are under pressure.•Flying debris or loose material is present.•Engine is running.•Tools are being used.
Check the cooling system every day to prevent over-heating, loss of performance or engine damage. Open the rear door and remove the rear grill.(See Removal And Installation on Page 50-60-1.) Use air pressure or water pressure to clean the top of the oil cooler
[Figure 10-90-1]
.
WARNING
Do not use your bare hands to remove debris from the oil cooler. Cooling fins are sharp and may cause injury.
IMPORTANT
AVOID ENGINE DAMAGE, Always use the correct ratio of water to antifreeze. Too much antifreeze reduces cooling system efficiency and may cause serious premature engine damage. Too little antifreeze reduces the additives which protect the internal engine components; reduces the boiling point and freeze protection of the system. Always add a premixed solution. Adding full strength concentrated coolant can cause serious premature engine damage.
Comprehensive Content List for Service Manuals
Advanced Control Systems
- Advanced Control System (ACS): 60-01
- Control Handle: 50-01
- Control Handle (ACS Selectable Hand/Foot Control): 50-01
- Control Panel (Adjustable Pintles): 50-01
- Control Panel (Non-Adjustable Pintles): 50-01
- Control Pedals: 50-01
- Control Pedals (ACS): 50-01
Air Systems
- Air Cleaner: 70-01
- Air Cleaner Service: 10-01
- Air Conditioning Service: 80-01
- Air Conditioning System Flow: 80-01
Electrical Components
- Alternator: 60-01
- Battery: 60-01
- Bobcat Controller: 60-01
- Electrical System Information: 60-01
- Electrical/Hydraulic Controls Reference: 60-01
Hydraulic and Mechanical Systems
- Basic Troubleshooting: 80-01
- BICS™ System: 60-01
- Brake: 40-01
- Bucket Position Valve: 20-01
- Cylinder (Lift): 20-01
- Cylinder (Power Bob-Tach): 20-01
- Cylinder (Tilt): 20-01
- Drive Components: 40-01
Cooling Systems
- Charge Pressure: 30-01
- Cooling Fan: 70-01
- Condenser: 80-01
- Engine Cooling System: 10-01
Engine Systems
- Compressor: 80-01
- Engine: 70-01
- Engine Components and Testing: 70-01
- Engine Lubrication System: 10-01
- Engine Speed Control: 70-01
- Engine Specifications – Kubota V2003-M-Di-T: Spec-01
- Engine Specifications – Kubota V2403-M-Di-T: Spec-01
HVAC Systems
- Evaporator: 80-01
- Evaporator/Heater Unit: 80-01
- Expansion Valve: 80-01
Additional Systems and Components
- Bob-Tach: 10-01, 50-01
- Conversions: Spec-01
- Diagnostics: 60-01
- Drive Belt: 30-01
- Components: 80-01
This structured layout helps in quickly locating relevant sections for servicing, maintenance, or troubleshooting.
Bobcat T190 Turbo Service Repair Manual
