John Deere 5928RFG Pump Drive Component Technical Manual
This manual is written for an experienced technician. Essential tools required in performing certain service work are identified in this manual and are recommended for use.
Model: 5928RFG Pump
Type: Component Technical Manual
Publication: CTM148819
Language: English
Format: PDF
- John Deere 5928RFG Pump Drive Component Technical Manual – 90 Pages
TABLE OF CONTENTS
Section 01—General Information
Group 000—Safety
Group 005—General
Section 02—Repair and Adjustments
Group 010—Repair Stand
Group 020—Pump Drive Gear
Group 030—Input Gear
Group 040—Input Housing
Group 050—Output Housing
Group 060—Serial Number Plate
Section 03—Theory of Operation
Group 130—Pump Drive Operation
Section 04—Diagnostics
Group 150—Observable Diagnostics
Section 05—Tools and Other Materials
Group 300—Special Tools
Section 06—Specifications
Group 400—Bolts and Cap Screws Specifications
This manual is written for an experienced technician. Essential tools required in performing certain service work are identified in this manual and are recommended for use.
Sealing Instructions – Disassembly
On disassembly, the dowel pins should remain pressed into the differential case and axle housing. Measure the length of protrusion to insure dowel pins will not prevent the axle housing from being drawn up tight. If dowel pins protrude more than 18 mm (0.709 in.) from the components, remove the dowel pins, clean the holes, and re-install the dowel pins to the specified depth.
